Home  
People
Research
Publications
Facilities
Lectures
Meetings and Events
Group News
Group Activities
Positions Available
Alumni
Safety
Links
   
  Updated: 05/04/07


Publications
Refereed Publications | Other Publications | Conference Proceedings

 
In preparation--draft available
8. S. P. Baker, R. Knepper, R. S. Fertig, "Microstructure with long range orientation gradients in bcc tantalum thin films"
7. R. S. Fertig, P. Pant, K. W. Schwarz, S. P. Baker, "Influence of stress inhomogeneity in thin films on strain hardening and threading dislocation interactions"
6. R. S. Fertig and S. P. Baker, "Threading dislocation interactions in an inhomogeneous stress field: a statistical model"
5. R. Knepper, R. S. Fertig, K. Jackson, S. P. Baker, "Microstructure of phase-transformed tantalum thin films"
4. R. S. Fertig, S. P. Baker, "Annihilation radius of screw dislocations moving in orthogonal directions under an applied strain and constrained by film thickness"
3. P. Pant and S.P. Baker, "Strain Relaxation by Dislocation Arrays in Thin Films"
2. K. Saha, J.B. Shu, and S.P. Baker, "Effect of Ti Adhesion Layers on the Thermomechanical Behavior of Thin Ag Films"
1. T. Staedler, E. Donnelly, M.C.H. van der Meulen, and S.P. Baker, "Static and Dynamic Nanoscale Mechanical Properties of Trabecular Bone"
Refereed Publications
29. R. Knepper and S. P. Baker, "Coefficient of thermal expansion and biaxial elastic modulus of b phase tantalum thin films." Applied Physics Letters 90(18): 181908-3. (2007)
28. E. Donnelly, S. P. Baker, A. L. Boskey, M. C. H. van der Meulen, "Effects of surface roughness and maximum load on the mechanical properties of cancellous bone measured by nanoindentation" Journal of Biomedical Materials Research Part A 77A(2), 426-435 (2006).
27. D. E. Nowak, D. R. Blasini, A. M. Vodnick, B. Blank, M. W. Tate, A. Deyhim, D.-M. Smilgies, H. Abruna, S. M. Gruner, and S. P. Baker, "A six-circle diffractometer with atmosphere- and temperature-controlled sample stage and area and line detectors for use in the G2 experimental station at CHESS" Review of Scientific Instruments 77(11), 113301 (2006).
26. R. Knepper, B. Stevens, S. P. Baker, "Effect of oxygen on the thermomechanical behavior of tantalum thin films during the b-a phase transformation" Journal of Applied Physics 100, 123508 (2006).
25. E. Donnelly, R. M. Williams, S. A. Downs, M. E. Dickinson, S. P. Baker, and M. C. H. van der Meulen, "Quasistatic and dynamic nanomechanical properties of cancellous bone tissue relate to collagen content and organization" Journal of Materials Research 21(8), 2106-2117 (2006).
24. M. Z. Pang and S. P. Baker, "Quantitative measurements of subcritical debonding of Cu films from glass substrates" Journal of Materials Research 20(9), 2420-2431 (2005).
23. J.B. Shu, S.Clyburn, T.E. Mates, and S.P. Baker, "Effect of Oxygen on the Thermomechanical Behavior of Passivated Cu Thin Films" Journal of Materials Research, 18(9) 2122-34 (2003)
22. P. Pant, K.W. Schwarz, and S.P. Baker, "Dislocation Interactions in Thin FCC Metal Films" Acta Materialia, 51(11) 3243-58 (2003)
21. S.P. Baker, R.-M. Keller-Flaig, and J.B. Shu, "Bauschinger Effect and Anomalous Deformation Induced by Oxygen in Passivated Thin Cu Films on Substrates" Acta Materialia, 51(10) 3019-3036 (2003)
20. H.T. Hesemann, P. Müllner, O. Kraft, D.E. Nowak, K. Finkelstein, S.P. Baker, and E. Arzt, "Texture Dependence of the Martensitic Transformation in Cobalt Thin Films," Scripta Materialia, 48(8) 1129-1133 (2003)
19. S.P. Baker, L. Zhang, and H. Gao "Effect of Dislocation Core Spreading on the Strength of Thin Films" Journal of Materials Research 17(7) 1808-1813 (2002)
18. H. Gao, L. Zhang, and S.P. Baker, "Dislocation Core Spreading at Interfaces Between Metal Films and Amorphous Substrates" Journal of the Mechanics and Physics of Solids, 50(10) 2169-2202 (2002)
17. S.P. Baker, X.Wang, and C.-Y. Hui, "Effect of Non-Linear Elastic Behavior on Bilayer Decohesion of Thin Metal Films from Nonmetal Substrates" Journal of Applied Mechanics, 69(4) 407 (2002)
16. S.P. Baker, A. Kretschmann, and E. Arzt, "Thermomechanical Behavior of Different Texture Components in Cu Thin Films" Acta Materialia, 49 2145-2160 (2001)
15. M. Kunert, O. Kienzle, B. Baretzky, S.P. Baker, and E.J. Mittemeijer, "Hardness-Depth Profile of a Carbon-Implanted Ti-6Al-4V Alloy and its Relation to Hardness and Microstructure" Journal of Materials Research, 16(8) 2321-2335 (2001)

14.

M. Kunert, B. Baretzky, S.P. Baker, and E.J. Mittemeijer, "Hardness-Depth Profiling on Nanometer Scale" Materials Transactions A, 32A 1201-1209 (2001)
13. S.P. Baker, "Plastic Deformation and Strength of Materials in Small Dimensions" Materials Science and Engineering A, A319-32, 16-23 (2001)
12. S.P. Baker, "Nanoindentation Techniques" in The Encyclopedia of Materials Science and Technology, (Pergamon, Oxford, 2001)
11. N. Burnham, S.P. Baker, and H. Pollack, "Model for Mechanical Property Nanoprobes" Journal of Materials Research, 15(9) 2006-2014 (2000)
10. S.P. Baker, Y.-C. Joo, and E. Arzt, "Electromigration Damage in Mechanically Deformed Polycrystalline and Single-Crystal Al Conductor Lines: Dislocations as Fast Diffusion Paths" Acta Materialia, 48 2199-2208 (2000)
9. Y.-C. Joo, C.V. Thompson, S.P. Baker, and E. Arzt, "Electromigration Proximity Effects of Two Neighboring Fast-Diffusion Segments in Single-Crystal Aluminum Lines" Journal of Applied Physics, 85(4) 2108-2113 (1999)
8. R.-M. Keller, S.P. Baker, and E. Arzt. "Stress-Temperature Behavior of Unpassivated Thin Copper Films" Acta Materialia, 47(2) 415-426 (1999)
7. Y.-C. Joo, S.P. Baker, and E. Arzt, "Electromigration in Single-crystal Aluminum Lines with Fast Diffusion Paths made by Nanoindentation" Acta Materialia, 46(6) 1969-1979 (1998)
6. R.-M. Keller, S.P. Baker, and E. Arzt, "Quantitative Analysis of Strengthening Mechanisms in Thin Cu Films: Effects of Film Thickness, Grain Size, and Passivation" Journal of Materials Research, 13(5) 1307-1317 (1998)
5. S.P. Baker, "Between Nanoindentation and Scanning Force Microscopy: Measuring Mechanical Properties in the Nanometer Regime" Thin Solid Films, 308-309 289-296 (1997)
4. S.P. Baker and W.D. Nix, "Intrinsic Stresses in Compositionally Modulated Au-Ni Thin Films and the Supermodulus Effect," Journal of Materials Research, 9(12) 3145 (1994)
3. S.P. Baker and W.D. Nix, "Mechanical Properties of Compositionally Modulated Au-Ni Thin Films: Nanoindentation and Microcantilever Deflection Experiments," Journal of Materials Research, 9(12) 3131 (1994)
2. S. Bader, S.P. Baker, W.-M. Kuschke and E. Arzt, "Mechanische Eigenschaften und Zuverlässigkeit von Materialien in Mikrodimensionen" ("Mechanical Properties and Reliability of Materials in Microdimensions," in German), Metall, 48(3) 370 (1994)
1. C.-M. Kuo, K.R. Forbes, S.P. Baker and W.D. Nix, "On the Question of Strain Rate Continuity in Stress Rate Change Experiments," Scripta Metall. 24 1623 (1990)
Other Publications
10. S.P. Baker, R.P. Vinci, and T. Arias, "Elastic and Anelastic Behavior of Materials in Small Dimensions" in Materials Research Society Bulletin, 27(1) 26-29 (2002)
9. R.P. Vinci and S.P. Baker, guest editors: "Mechanical Properties of Materials in Small Dimensions" Materials Research Society Bulletin Volume 27, Issue 1, January, 2002 (Materials Research Society, Warrendale PA)
8. S.P. Baker, M.A. Korhonen, E. Arzt, and P. Ho proceedings of the Sixth International Workshop on Stress-Induced Phenomena in Metallization, held at Cornell University, Ithaca, NY, July 25-27, 2001 (AIP Conference Proceedings volume 612, American Institute of Physics, Melville, NY 2002)
7. O. Kraft, K.W. Schwarz, S.P. Baker, R. Hull, and L.B. Freund, proceedings of the symposium, Dislocations and Deformation Mechanisms in Thin Films and Small Structures, held at the 2001 Spring Meeting of the Materials Research Society in San Francisco, CA, USA (Proceedings volume 673, Materials Research Society, Warrendale, PA, 2001)
6. S.P. Baker, R.F. Cook, S.G. Corcoran, and N.R. Moody, proceedings of the symposium, Fundamentals of Nanoindentation and Nanotribology II, held at the 2000 Fall Meeting of the Materials Research Society in Boston, MA, USA, (Proceedings volume 649, Materials Research Society, Warrendale, PA, 2001)
5. N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker, proceedings of the symposium, Fundamentals of Nanoindentation and Nanotribology, held at the 1998 Spring Meeting of the Materials Research Society in San Francisco, CA, USA, (Proceedings volume 522, Materials Research Society, Warrendale, PA, 1998) 491 pages
4. S.P. Baker, "Besonderheiten bei der Nanohärteprüfung an Silizium" (Special Considerations for Nanohardness testing of Silicon - in German) Deutsches Institut für Normung e.V. DIN Fachbericht 65 (Beuth Verlag GmbH, Berlin 1997)
3. W.W. Gerberich, H. Gao, J.-E. Sundgren, and S.P. Baker, proceedings of the symposium, Thin Films: Stresses and Mechanical Properties VI, held at the 1996 Spring Meeting of the Materials Research Society in Boston, MA, USA. (Proceedings volume 436, Materials Research Society, Pittsburgh, PA, 1996) 542 pages
2. S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert and P. Børgesen, proceedings of the symposium, Thin Films: Stresses and Mechanical Properties V, held at the 1994 Fall Meeting of the Materials Research Society in Boston USA. (Proceedings volume 356, Materials Research Society, Pittsburgh, PA, 1995) 901 pages
1. S.P. Baker and E. Arzt, "Elastic Stiffness Constants of SiGe," in Properties of Strained and Relaxed Silicon Germanium, edited by Erich Kasper, (INSPEC, the Institution of Electrical Engineers, Electronic Materials Infomation Service Datareviews Series No. 12, London, 1995) p. 67-69
Conference Proceedings
33. D. E. Nowak and S. P. Baker, "Early yielding and stress recovery in (111) and (100) texture components in Cu thin films determined using synchrotron X-ray diffraction" in Thin Films - Stresses and Mechanical Properties X (Mat. Res. Soc. Symp. Proc. 795, 2004) p. 449-454
32. D. E. Nowak, B. Blank, A. Deyhim, and S.P. Baker, "Development of an Ultra-High Vacuum Oven for High Temperature X-Ray Studies," in Synchrotron Radiation Instrumentation: Eighth International Conference on Synchrotron Radiation Instrumentation edited by T. Warwick, J. Arthur, H.A. Padmore, J. Stöhr, (AIP Conference Proceedings 705, 2004) p. 1146-9
31. S.P. Baker, "Themomechanical Behavior of Different Texture Components in Thin FCC Metal Films," in Mechanical Properties Derived from Nanostructuring Materials edited by D.F. Bahr, N.R. Moody, H.H. Kung, K.J. Wahl, (Mat. Res. Soc. Symp. Proc. 778, Materials Research Society, Warrendale, PA, 2003)
30. T. Staedler, E. Donnelly, M.C.H. van der Meulen, and S.P. Baker, "Quasi-Static and Dynamic Nanoindentation Testing of Lamellar and Inter-Lamellar Trabecular Bone," in Mechanical Properties Derived from Nanostructuring Materials edited by D.F. Bahr, N.R. Moody, H.H. Kung, K.J. Wahl, (Mat. Res. Soc. Symp. Proc. 778, Materials Research Society, Warrendale, PA, 2003) p. 79-84
29. M. Pang and S.P. Baker, "Quantitative Measurements of Subcritical Debonding of Cu Films from Glass Substrates," in Materials, Technology, and Reliability for Advanced Interconnects and Low-k Dielectrics, edited by J. Leu, A. McKerrow, O. Kraft, and T. Kikkawa, (Mat. Res. Soc. Symp. Proc. 766, Materials Research Society, Warrendale, PA, 2003) p. 183-8
28. P. Pant and S.P. Baker, "Strain Relaxation by Dislocation Arrays in Thin Films," in Multiscale Phenomena in Materials-Experiments and Modeling Related to Mechanical Behavior, edited by K.J. Hemker, D.H. Lassila, L.E. Levine, and H.M. Zbib, (Mat. Res. Soc. Symp. Proc. 779, Materials Research Society, Warrendale, PA, 2003) p. 171-6
27. J.B. Shu and S.P. Baker, "Plastic Relaxation in Thin Copper Films," in: Thin Films: Stresses and Mechanical Properties IX, edited by C.S. Ozkan, L.B. Freund, R.C. Cammarata, and H. Gao, (Mat. Res. Soc. Symp. Proc. 695, Materials Research Society, Warrendale, PA, 2002) p. 15-20
26. D.E. Nowak, O. Thomas, E. Stach, and S.P. Baker, "X-Ray Diffraction Analysis and Modeling of Strain Induced by Thermal Cycling in a Thin Aluminum (011) Bicrystal Film" in Thin Films: Stresses and Mechanical Properties IX, edited by C.S. Ozkan, L. B. Freund, R.C. Cammarata, and H. Gao, (Mat. Res. Soc. Symp. Proc. 695, Materials Research Society, Warrendale, PA, 2002) p. 3-8
25. P. Pant, K.W. Schwarz, and S.P. Baker,"Dislocation Dynamics Simulations of Dislocation Interactions in Thin FCC Metal Films" in Dislocations and Deformation Mechanisms in Thin Films and Small Structures, edited by O. Kraft, K.W. Schwarz, S.P. Baker, R.Hull, and L.B. Freund (Mat. Res. Soc. Symp. Proc. 673, Materials Research Society, Warrendale, PA, 2001) p. P2.2.1-6
24. H. Gao, L. Zhang, and S.P. Baker,"Dislocation Core Spreading at Interfaces between Crystalline and Amorphous Solids" in Dislocations and Deformation Mechanisms in Thin Films and Small Structures, edited by O. Kraft, K.W. Schwarz, S.P. Baker, R.Hull, and L.B. Freund (Mat. Res. Soc. Symp. Proc. 673, Materials Research Society, Warrendale, PA, 2001) p. P2.6.1-6
23. M. Kunert, B. Baretzky, E.J. Mittemeijer, and S.P. Baker, "Sub-Micrometer Spatially Resolved Measurements of Mechanical Properties and Correlation to Microstructure and Composition," in Fundamentals of Nanoindentation and Nanotribology, edited by S.P. Baker, R.F. Cook, S.G. Corcoran, and N.R. Moody, (Mat. Res. Soc. Symp. Proc. 649, Materials Research Society, Warrendale, PA, 2001) p. Q3.2.1-Q3.2.6
22. Y.-C. Joo, S.P. Baker, E. Arzt, and C.V. Thompson "Model Studies of Electromigration using Indented Single-Crystal Aluminum Lines," in Proceedings of the Fifth International Workshop on Stress Induced Phenomena in Metallization (AIP Conf. Proc. 491, American Institute of Physics, New York, 1999) p. 100-111
21. J. Shu, S. Clyburn, T. Mates, and S.P. Baker "Effects of Thickness and Oxygen Content on Thermomechanical Behavior of Thin Cu Films Passivated with AlN" in Materials Reliability in Microelectronics IX," edited by D.D. Brown, Ad.H. Verbruggen, and C.A. Volkert, (Mat. Res. Soc. Symp. Proc. 563, Materials Research Society, Warrendale, PA, 1999) p. 707-712
20. M. Hommel, O. Kraft, S.P. Baker, and E. Arzt, "Micro-tensile and Fatigue Testing of Copper Thin Films on Substrates" in Materials Science of Microelectromechanical System (MEMS) Devices, edited by A.H. Heuer, and S.J. Jacobs, (Mat. Res. Soc. Symp. Proc. 546, Materials Research Society, Warrendale, PA, 1999)
19. M. Kunert, B. Baretzky, S.P. Baker, and E.J. Mittemeijer, "Nanometer-scale Measurements of Mechanical Properties and Composition in an Ion Implanted Titanium-based Alloy" in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker, (Mat. Res. Soc. Symp. Proc. 522, Materials Research Society, Warrendale, PA, 1998) p. 95-100
18. S.P. Baker, R.-M. Keller, A. Kretschmann, and E. Arzt, " Deformation Mechanisms in Thin Cu Films" in Materials Reliability in Microelectronics VIII, edited J.C. Bravman, T.N. Marieb, J.R. Lloyd, and M.A. Korhonen, (Mat. Res. Soc. Symp. Proc. 516, Materials Research Society, Warrendale, PA, 1998) p. 287-298
17. S.P. Baker, R.-M. Keller, and E. Arzt, "Energy Storage and Recovery in Thin Metal Films on Substrates," in Thin Films: Stresses and Mechanical Properties VII, edited by R.C. Cammarata, M. Nastasi, E.P. Busso, and W.C. Oliver, (Mat. Res. Soc. Symp. Proc. 505, Materials Research Society, Warrendale, PA, 1998) p. 605-610
16. S.P. Baker, M.P. Knauß, and E. Arzt, "Measuring Mechanical Properties in Small Dimensions via Deflection of Micrometer Scale Cantilever Beams" in Abstract Proceedings of the 1997 SEM Spring Conference on Experimental Mechanics, Society for Experimental Mechanics, Bethel, CN, 1997) p. 110-111
15. Y.-C. Joo, P. Müllner, S.P. Baker, and E. Arzt, "Mechanical Properties of Al-Cu Films with Various Heat Treatments," in Materials Reliability in Microelectronics VII, edited J.J. Clement, R.R. Keller, K.S. Krish, J.E. Sanchez, Jr., and Z. Suo, (Mat. Res. Soc. Symp. Proc. 473, Materials Research Society, Pittsburgh, PA, 1997) p. 409-414
14. S.P. Baker, C.R. Ottermann, M. Laube, F. Rauch, and K. Bange, "Dependence of Hardness and Stiffness on Density of TiO2 and Ta2O5 Layers," in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.-E. Sundgren, and S.P. Baker, (Mat. Res. Soc. Symp. Proc. 436, Materials Research Society, Pittsburgh, PA, 1996) p. 71-76
13. S. Kirchner, O. Kraft, S.P. Baker, and E. Arzt, "Microstructure and Mechanical Properties of Thin Al-0.6%Si-0.6%Ge Films," in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.-E. Sundgren, and S.P. Baker, (Mat. Res. Soc. Symp. Proc. 436, Materials Research Society, Pittsburgh, PA, 1996) p. 21-26
12. A. Kretschmann, W.-M. Kuschke, S.P. Baker, and E. Arzt, "Plastic Deformation in Thin Cu Films Determined by X-ray Microtensile Tests," in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.-E. Sundgren, and S.P. Baker, (Mat. Res. Soc. Symp. Proc. 436, Materials Research Society, Pittsburgh, PA, 1996) p. 59-64
11. R.-M. Keller, W. Sigle, S.P. Baker, O. Kraft, and E. Arzt, "In-Situ TEM Investigation During Thermal Cycling of Thin Copper Films," in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.-E. Sundgren, and S.P. Baker, (Mat. Res. Soc. Symp. Proc. 436, Materials Research Society, Pittsburgh, PA, 1996) p. 221-226
10. Y.-C. Joo, S.P. Baker, M.P. Knauß, and E. Arzt, "Electromigration in Single-Crystal Aluminum Lines Pre-Damaged by Nanoindentation," in Materials Reliability in Microelectronics VI, edited by W.F. Filter, J.J. Clement, A.S. Oates, and R. Rosenberg, (Mat. Res. Soc. Symp. Proc. 428, Materials Research Society, Pittsburgh, PA, 1996) p. 225-230
9. M.P. Knauss, S.P. Baker and E. Arzt, "Biegeexperimente an Mikrobalken zur Bestimmung Mechanischer Eigenschaften von Dünnen Schichten" ("Microbeam Bending Experiments for Determination of the Mechanical Properties of Thin Films," in German), in Micro Materials '95 (Deutsher Verband für Materialforschung und -prüfung e.V, Berlin 1996) p. 653-658
8. S.P. Baker, M.P. Knauss, U.E. Möckl and E. Arzt, "Electroplasticity and Electromigration" in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert and P. Børgesen, (Mat. Res. Soc. Symp. Proc. 356, Materials Research Society, Pittsburgh, PA, 1995) p. 483
7. S.P. Baker, J.A. Bain, B.M. Clemens and W.D. Nix, "Interfacial Structure and Mechanical Properties of Compositionally-Modulated Au-Ni Thin Films" in Polycrystalline Thin Films: Structure, Texture, Properties and Applications, edited by M. Parker, K. Barmak, R. Sinclair, D.A. Smith and J Floro, (Mat. Res. Soc. Symp. Proc. 343, Materials Research Society, Pittsburgh, PA, 1994) p. 555
6. S.P. Baker, "The Analysis of Depth-Sensing Indentation Data," in Thin Films: Stresses and Mechanical Properties IV, edited by P.H. Townsend, J.E. Sanchez, T.P. Weihs and P. Børgesen, (Mat. Res. Soc. Symp. Proc. 308, Materials Research Society, Pittsburgh, PA, 1993) p. 209
5. S.P. Baker, M.K. Small, J.J. Vlassak, B.J. Daniels and W.D. Nix, "The Search for the Supermodulus Effect," in the proceedings of the NATO Advanced Study Institute: Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, (NATO ASI Series E, Applied Sciences, 233, Kluwer Academic Publishers, Dordrecht, 1993) p. 165
4. S.P. Baker, T.W. Barbee Jr. and W.D. Nix, "Time-Dependent Deformation in Room-Temperature Indentation Experiments using a Nanoindenter," in Thin Films: Stresses and Mechanical Properties III, edited by W.D. Nix, J.C. Bravman, E. Arzt and L.B. Freund, (Mat. Res. Soc. Symp. Proc. 239, Materials Research Society, Pittsburgh, PA, 1989) p. 319
3. S.P. Baker and W.D. Nix, "Mechanical Properties of Thin Films on Substrates," in Optical Thin Films III: New Developments, edited by R. Ian Seddon, Proc. SPIE 1323, 263 (1990)
2. S.P. Baker, A.F. Jankowski, S. Hong and W.D. Nix, "Mechanical Properties of Compositionally-Modulated Au-Ni Thin Films Using Indentation and Microbeam Deflection Techniques", in Thin Films: Stresses and Mechanical Properties II, edited by M.F. Doerner, W.C. Oliver, G.M. Pharr, and F.R. Brotzen, (Mat. Res. Soc. Symp. Proc. 188, Materials Research Society, Pittsburgh, PA, 1989) p. 289
1. S.R. Nutt, K.A. Green, S.P. Baker, W.D. Nix and A.F. Jankowski, "Gold-Nickel Multilayer Films: Structure-Property Correlations," in Thin Films: Stresses and Mechanical Properties, edited by J.C. Bravman, W.D. Nix, D.M. Barnett and D.A. Smith, (Mat. Res. Soc. Symp. Proc. 130, Materials Research Society, Pittsburgh, PA, 1989) p. 129
   

home - materials science and engineering - college of engineering - contact us - webmaster